SURAT EV BATTERY DIAGNOSTIC HOSPITAL

SURGICAL BATTERY DIAGNOSTICS & REPAIR

Don’t discard a ₹45,000 battery pack for a ₹2,000 cell drift. We diagnose cell impedance deltas, replace fractured micro-welds, flash malfunctioning BMS units, and revive full driving range.

Call Lab: +91 9898491290

Active Cell Balancing

When cell voltages diverge by more than 50mV, your vehicle cuts off prematurely. We connect laboratory-grade 1.2A active balancers to equalize every series group to within ±5mV.

Laser Tab & Weld Repair

Road vibrations on Indian potholes often crack weak spot-weld tabs, causing high contact resistance and voltage sag. We precision re-weld joints with pure copper-nickel busbars.

BMS Diagnostics & Swap

Failed MOSFETs, corrupted firmware, or fried temperature sensing leads? We diagnose circuit faults, flash firmware, or swap in smart Bluetooth active BMS systems with real-time app telemetry.

Standard Operating Procedure

4-Step Diagnostic Turnaround Protocol

STEP 1 (Hour 0-2)

Drop-Off & Visual Inspection

Physical casing check, terminal torque test, and thermal camera scan for hot spots.

STEP 2 (Hour 2-12)

Multi-Channel IR Scan

Computerized open-circuit voltage (OCV) logging and internal impedance grading per series.

STEP 3 (Hour 12-24)

Surgical Rebalancing & Weld

Active energy redistribution between cells and laser re-welding of high-resistance tabs.

STEP 4 (Hour 24-48)

100% Load Dyno Validation

Full continuous 1C discharge test on regenerative load bank with printable test report.

Got Questions?

Frequently Asked Diagnostics Questions

In 85% of cases diagnosed in our Surat lab, the battery cells are not dead. Instead, one or two cell groups have drifted out of balance (cell delta > 50mV). The BMS shuts down early to protect the lowest group, leaving the remaining 90% of cells under-utilized. Active rebalancing restores this capacity without buying a new battery.